High Speed Plasticure inks are formulated for dry offset production of small and large pre-formed containers. With Plasticure H/S inks, misting ids almost non-existent, making Plasticure H/S well suited for the fastest production speeds of modern mandrel equipped presses. These inks have a very low odor, making them ideal for printing on plastics used in food packaging such as PVC, PE, PP and Polystyrene.
Features and Benefits
Gans Plasticure EX
Plasticure Extra dry-offset inks have a chemical resistance and outdoor weather resistance that far exceed those of competing products.
The vehicles and photoinitiators of Plasticure Extra will provide optimum cure response, the very highest scratch/scuff resistance and the most tenacious adhesion to the plastic surface of any dry-offset UV curing product.
Plasticure Extra inks have additional built-in resistance to alkalis, acids, fats and oils. Such chemical-resistance properties make Extra inks uniquely suited to the printing of buckets that contain industrial products (driveway sealer, putty, spackle, etc.), nursery products and outdoor signage.
The twelve select pigments, each with enhanced light fastness in the blue-wool range of 7-8, combine to make the shades of Plasticure Extra the most fade-resistant available in UV dry-offset inks.
Plasticure H/S inks are available in a 4/C Process series. Dense Black, two part metallic and Pantone shades.
Store all Plasticure and Plastcure Extra in a cool, dry area. Avoid exposure to direct sunlight. When stored as directed, shelf life is 6 months.
As with all UV inks, Plasticure and Plasticure Extra inks may cause skin irritation upon contact. Follow proper handling procedures outlined in the MSDS.